2 Microphone/Line combo inputs: XLR / 6.3 mm jack
Hi-Z instrument input: 6.3 mm jack
2 Line outputs: 6.3 mm jack
2 Monitor outputs: 6.3 mm jack
ADAT/SPDIF optical input Stereo headphone output: 6.3 mm jack
Thunderbolt 3 connector (thunderbolt cable not included)
Input for external power supply
Level Knob – The Level knob controls multiple functions. The knob’s current function is selected with the PREAMP and MONITOR buttons.
Preamp Gain & Volume Level Indicator LEDs – The LEDs surrounding the Level knob indicate the relative level of the selected function (either input channel preamp gain or monitor/headphone volume).
Channel Selection Indicators – The currently selected input channel is indicated by the lit channel name above its input meter (CH1 or CH2).
Input Meters – The two input meters display signal levels for each of the analog input channels.
Input Source Indicators – These indicators show which input source jack (MIC, LINE, or HI-Z) is active for the selected input channel.
Stereo Output Meters – These meters display the main stereo signal output bus levels.* The main output bus levels are independent of monitor and headphone volume levels.
MONITOR Selected Indicator – When MONITOR is lit, the Level knob controls volume of the monitor outputs
Headphone Selected Indicator – When HEADPHONE is lit, the Level knob (1) controls the volume of the headphones output.
Options Display – This panel displays the state of the preamp and monitor options, which are controlled by the six Option Buttons
(a) INPUT Select Selects the active input source jack for the currently selected channel. The current selection is displayed by the Input Source Indicators.
(b) FILTER Enables a low cut (high pass) rumble filter with a cutoff frequency of 75 Hz.
(c) +48V Enables +48-volt phantom power for the mic input. Phantom power is typically needed for condenser microphones.
(d) PAD Attenuates (lowers) the XLR mic input signal level by 20 dB.
(e) POLARITY Ø Inverts the polarity (aka “phase”) of the input signal.
(f) LINK Links input channels 1 and 2 as a stereo pair.
(g) TALK Activates the built-in talkback microphone and the DIM function.
(h) DIM Reduces the monitor output volume level. The amount of DIM attenuation is set in the companion Console software.
(i) ALT (Alternate) Switches the main monitor mix to an alternate set of outputs
(j) FCN (Function) This switch can be assigned to control one of three monitoring functions.
(k) MONO Sums the left and right signals of the stereo monitor mix into a monophonic signal.
(l) MUTE Mutes the monitor outputs.
PREAMP Button – Press this button to enter PREAMP Mode and activate the input channel controls. Press again to alternate the selected input channel between CH1 and CH2.
Monitor Button – Press this button to enter MONITOR Mode and activate the monitor and headphone controls. Press again to alternate between control of monitor and headphone volumes with the Level knob.
Option Buttons – Each of the six Option Buttons has dual functions. In Preamp mode, the buttons control the preamp options for the currently selected input channel. In Monitor mode, the buttons control the monitor and headphone options.
AC Requirements 100V – 240V AC, 50 – 60 Hz
DC Connector Type Male plug, 2.1 mm x 5.5 mm, center positive
DC Requirements 12 VDC, ±5%
Maximum Power Consumption 15 Watts (when portable host computer not charging)
WHD: 160 x 66 x 157,5mm