Aguilar Tonehammer 700
SOLD
Product is currently not available. Contact us
or see more products from Aguilar.
You might also want to connect with us on Facebook, YouTube, Instagram, or by email.
You might also want to connect with us on Facebook, YouTube, Instagram, or by email.
Out of stock
Aguilar Tonehammer 700
Giving the Tone Hammer® 700 its flexible tone-shaping capabilities is Aguilar’s Tone Hammer preamp, the same preamp used in the Tone Hammer D.I./preamp pedal, which has become a favourite of bass players all over the world.
The 4.9 lb. (2.22 kg) Tone Hammer 700 delivers 700 continuous watts @ 4 or 2.67 ohms, 350 watts @ 8 ohms and features bass, treble and fully sweepable midrange controls. The Drive control utilizes Aguilar’s proprietary AGS circuit which adds subtle distortion and midrange punch to the sound.
The Tone Hammer 700 also features a series effects loop, XLR balanced output and two rear-panel Speakon outputs. Universal mains means that this amp is ready to travel anywhere in the world – just plug and play!
Specs
Power and Ohm
- Maximum Power Output
- 700 watts into 4 or 2,67 ohms, 350 watts into 8 ohms
- Minimum Load Impedance
- 2.67Ω
Controls
- Gain
- Changes the volume of the signal the Active 3 Band EQ.
- Drive
- Fully adjustable, featuring Aguilar’s proprietary AGS(adaptive gain shaping) circuit.
- Level
- Controls the Microtubes Engine’s output volume.
- Master
- Controls the overall volume of the amplifier.
Eq
- Bass
- +/- 17 dB @ 40 Hz
- Mid
- +/- 16 dB
- Mid Frequency
- 180 Hz – 1 kHz
- Treble
- +/- 14 dB @ 4 kHz
Toggle switches
- Input Pad
- -10dB input pad
- Mute
- Mutes the amplifier.
- Post-Pre
- Selects what signal will be delivered by the DI output. Selecting PRE, sends a clean copy of your input bass signal. Selecting POST delivers a signal processed by the preamp of the amp (gain, distortion, eq, master, etc.)
- Ground Lift
- Lifts the ground of the DI XLR output. If a ground noise in you DI signal is experienced, try changing the setting of this control.
Outputs
- Speaker out
- Connects the amplifier to your cabinet.
- Pre Amp Out
- This output connects the preamp to a different power amp.
- Balanced Output
- Output to balanced equipment (mic preamp, console, recorder, compressor, audio interface, etc.) via a standard XLR jack.
- Effect Loop
- Series operation. Adds 6 dB of additional gain, making it useful for a broad range of effects units.
Mechanics
- Dimension
- W 31 x D 23 x H 8 cm
- Weight
- 2.22 Kg