Genzler Magellan ULV-210T
In stock
Two Tens, Without the Weight
Two tens have always been the sweet spot between punch and portability, and the ULV-210T pushes that idea about as far as it will go. At 11.34 kg it weighs roughly the same as a loaded gig bag, yet it handles 600 watts and moves serious air. The vertically stacked drivers keep the low end tight and fire your midrange straight at your ears, so your sound stays focused and present wherever you stand on stage.
Two premium neodymium 10″ loudspeakers sit in a vertical column, each built around a dual-wound voice coil that lifts power handling and efficiency together. They cross over at 5.6 kHz to a compact 1″ neodymium bullet tweeter through a 12 dB/octave network, with a 100W L-Pad to set the highs. The enclosure is ultra-light poplar plywood with internal damping, finished in heavy-duty textured black vinyl with metal corners, a recessed top handle and the signature center-pleat grille — a proper touring build that just happens to weigh almost nothing.
Sound & Fit
With 600 watts at 8 ohm and a high 99 dB sensitivity, the 210T is loud, articulate and quick on the attack — exactly what a pair of tens should be. Two tens give you a tighter, more aggressive low-mid punch than a single large driver, which is why they cut so well in a loud band, and the response still reaches down to 42 Hz so your low B lands with weight.
It’s a complete rig on its own for the vast majority of gigs, and it stacks beautifully with a ULV-112T when you want to add depth and cone area for a bigger room. Drive it with the Magellan 800+ and you have a full-power, feather-light rig — the head in one hand, the cabinet in the other. For the working bassist who loads in alone, that combination is genuinely hard to beat.
Specs
Performance
- Speakers
- Two premium neodymium 10″ loudspeakers with a unique dual-wound voice coil design for increased power handling and efficiency.
- Tweeter
- One proprietary compact 1″ high-powered neodymium bullet tweeter for extended range and smooth high-frequency response.
- Power Handling
- 600 Watt
- Nominal Impedance
- 8 ohm
- Frequency Response
- 42 Hz – 15 kHz
- Sensitivity 1W/1M
- 99 dB
- Crossover Frequency
- 5.6 kHz
- Crossover Network
- Custom-designed 12 dB/octave slope with 100W L-Pad level control.
- Output
- One Speakon® NL-4 connector and 2 × ¼″ sealed jacks.
Measurements
- Dimensions (H×W×D)
- 66.4 × 36.2 × 35.6 cm (26⅛″ × 14¼″ × 14″)
- Weight
- 11.34 kg (25 lbs)
Cabinet material
- Cabinet Construction
- Ultra-light poplar plywood with internal acoustic dampening.
- Cabinet Finish
- Heavy-duty textured black vinyl.
- Corners & Bar
- Black metal corners and a top-mounted, recessed bar handle.
- Grille
- Custom curved grille with a center pleat protecting the vertical driver array.
- Feet
- Large rubber feet.
