14-Day Return Policy
Rated 4.9/5 on Trustpilot ★★★★★

Genzler Magellan ULV-212T

$ 1,605.23excl. VAT

In stock

One Cabinet for the Whole Stage

A 2×12 is the do-it-all cabinet — enough cone area for deep, full lows, enough tightness to stay articulate, and enough output to cover almost any room on its own. The ULV-212T delivers all of that at just 16.1 kg, a weight that used to be unthinkable for a full-range pair of twelves, and it sits at the top of Genzler’s Ultra-Light Vertical line as the flagship.

Two premium neodymium 12″ loudspeakers, each with a dual-wound voice coil for higher power handling and efficiency, are stacked vertically and crossed over at 5.6 kHz through a 12 dB/octave network with a 100W L-Pad to a compact 1″ neodymium bullet tweeter. Genzler builds the enclosure from a mix of 12 mm and 15 mm ultra-light poplar plywood — the thicker panels where they add rigidity, the lighter ones everywhere else — finished in textured black vinyl with metal corners, a recessed bar handle and the center-pleat grille that protects the driver column.

Sound & Fit

Running at 4 ohm the 212T pulls the full 700 watts from a matching head and moves serious air, with response reaching all the way down to 37 Hz and a high 101 dB sensitivity that makes it feel effortless. The two twelves give you a big, deep, full-range voice that stays defined even when you push it — the kind of low end you feel as much as hear, but without the boom that a filter like the Magellan’s HPF is there to clean up.

This is a stand-alone rig for medium and large stages, and the vertical format keeps your sound coherent whether you’re standing right in front of it or across the room. It’s the top of the ULV range for a reason: one cabinet that does everything and never wrecks your back. Drive it with the Magellan 800+ for a complete, tour-ready, ultra-light rig with power to spare.

Specs

Performance

Speakers
Two premium neodymium 12″ loudspeakers with a unique dual-wound voice coil design for increased power handling and efficiency.
Tweeter
One proprietary compact 1″ high-powered neodymium bullet tweeter for extended range and smooth high-frequency response.
Power Handling
700 Watt
Nominal Impedance
4 ohm
Frequency Response
37 Hz – 15 kHz
Sensitivity 1W/1M
101 dB
Crossover Frequency
5.6 kHz
Crossover Network
Custom-designed 12 dB/octave slope with 100W L-Pad level control.
Output
One Speakon® NL-4 connector and 2 × ¼″ sealed jacks.

Measurements

Dimensions (H×W×D)
75.6 × 45.7 × 35.6 cm (29¾″ × 18″ × 14″)
Weight
16.1 kg (35.5 lbs)

Cabinet material

Cabinet Construction
12 mm & 15 mm ultra-light poplar plywood with internal acoustic dampening.
Cabinet Finish
Heavy-duty textured black vinyl.
Corners & Bar
Black metal corners and a top-mounted, recessed bar handle.
Grille
Custom curved grille with a center pleat protecting the vertical driver array.
Feet
Large rubber feet.

You may also like…

You are offline
Reload page when online